“Tool performance contains two things: time and production quantity.”
Category - TOOL PRODUCTION
“When a melted plastic begins to be injected into the mold cavity, it comes into contact with the mold surfaces…”
“The quality of the tool means to be able to produce the parts in requested quantities with requested…”
“Moldability is limited with the manufacturability of the designed part.”
“When a modification desired on the mold, the first moldability of the change is checked.”
“During shrinkage of plastic, temperature occur between the each region of the plastic part and…”
“Hold cost can be considered in three main categories: the cost of designing and manufacturing the mold, the cost of…”
“The customer who knows what he/she wants, will use the word of right price instead of cheap or expensive.”
“The mold is made by machining and this process take time.”
“Designing a mold is to solve the problem with multiple solutions.”
“If you can do the chemical analysis of the steel that will be used in your mold and you can…”
“One of the most common polishing problems is pitting on the surface. Pitting is the common name for…”
“A plastic injection mold should be as bright as a mirror. The old or steel can be…”
“One of the most common complaints about the polishing of plastic injection holds…”
“The EDm process damages the surface of the mold, but it is now almost impossible to make mold without EDM.”
“It is very difficult to make forming and cutting tool without EDM operation.”
“The punches must work parallel to rolling direction. If the EDM block is…”
“The majority or the tool failures cme from the punches.”
“Tool steels are high alloyed steels. These steels contain chromium…”
“Cold work steels have high chromium and carbon content.”
“All steel grades are produced by forging or rolling except for PM steels.”
“There’s no need for die and the punch to be made of the same steel.”
