“Cutting, forming tool and stamp can be produced out of oil-hardening steels.”
Category - TOOL STEEL
“For traditional steels, rolling direction is very important.”
“There are two methods of tool steel manufacturing. First one is traditional…”
“The most commonly used cold work tool steel, especially for body shell forming tools…”
“The punches must work parallel to rolling direction. If the EDM block is…”
“Cold work steels have high chromium and carbon content.”
“The majority of sheet metal production lines stop by the breakage stop by the breakage of a small…”
“The punches work to compress which means they swell while working.”
“Vanadis 8 has as high wear resistance as Vanadis 10. And as high toughness as…”
“Vanadis 4 Extra is the next generation PM steel and is very assertive to be the…”
“All steel grades are produced by forging or rolling except for PM steels.”
FAILURE MECHANISMS, HEAT TREATMENT, TOOL STEEL, TOOLS
Can 2379, Sverker 21 and Sleipner be nitrided?
“In cutting and forming tools the nitridig layer should be very thin.”
“The chromium content decreased while switching to 2379 from…”
“Vanadis 8 is advanced version of Vanadis 10 and based on the idea from Vanadis 4E.”
“Calmax is a cold work steel that can reach 60 HRc. It is based on automotive industry.”
“Carmo is the pre-hardened vrsion of Calmax. It is used in forming tools of…”
“Cold work steels are generally non-ESR. Caldie is one of the special steels…”
“They have the same chemical composition, but they are not the same.”
